Announcement

Collapse
No announcement yet.

Vacuum hoses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vacuum hoses

    Anyone sell a kit with all the vacuum hoses precut and prelabled, other than ebay. I know I have a leak somewhere and instead of trying to find "it", as if theres only one, on a 21 year old car....I figure il just replace them all! I know theres a silicone hose kit on Ebay for $83 shipped, but figured id see it there were any other options....

    #2
    Is that the HiPerformance kit? They're good, being able to cut length to size is a bonus IMO.

    Dont remember finding much else when i searched before.
    sigpic
    1988 Lachssilber E30 325i sedan.
    Factory fit-out: manual; SILBER LEDER; M SPORT SUSPENSION.
    Modifications so far: Miller MAF + 19# ECU; Ford 19# Design 3 injectors; IE adjustable FPR; KAMotors CF airbox; IM MTX-L; EBC Greenstuff.

    Retired - '83 Arctic Blue E28 528i powered by M30B32

    Comment


      #3
      Originally posted by BMW_325i View Post
      Is that the HiPerformance kit? They're good, being able to cut length to size is a bonus IMO.

      Dont remember finding much else when i searched before.
      Yep HiPerformace is the name of the seller, and I agree being cut to length and labeled is a big plus...I just figured id see if there were any other options.

      Comment


        #4
        Hmm that's very tempting...the silicone is so tight you don't need to use hose clamps either. Too bad it's a lot of money for hoses... I'm not having much luck finding metric vacuum hose in assorted sizes for cheap though.

        Comment


          #5
          Anybody have the sizes of all the vacuum hoses? Can't find the charcoal canister on realoem... or the ones under the intake manifold...
          Last edited by davem; 05-21-2011, 04:21 PM.

          Comment


            #6
            Originally posted by davem View Post
            Can't find the charcoal canister on realoem...
            Should be under Fuel Supply => Vent

            8x13mm
            sigpic
            1988 Lachssilber E30 325i sedan.
            Factory fit-out: manual; SILBER LEDER; M SPORT SUSPENSION.
            Modifications so far: Miller MAF + 19# ECU; Ford 19# Design 3 injectors; IE adjustable FPR; KAMotors CF airbox; IM MTX-L; EBC Greenstuff.

            Retired - '83 Arctic Blue E28 528i powered by M30B32

            Comment


              #7
              The hoses are just one of the many places that an intake leak can occur. I don't know of a kit of hoses, but there are only 7 hoses that could need to be replaced.
              The car makes it possible, but the driver makes it happen.
              Jim Levie, Huntsville, AL

              Comment


                #8
                do you mind posting those part numbers?

                Comment


                  #9
                  If you go on highperformance website its actually a bit less. For the kit.

                  Comment

                  Working...
                  X