Just swapped an 87 'i' harness into my car to use in an 'i' head swap and I am trying to start the car and getting no spark and no fuel, by no fuel I mean the fuel pump isn't even turning on. The coil is fine, plugs are fine, injectors are fine, and CPS is fine. I should probably mention I'm using eta plug wires not 'i' plug wires, i know the 'i's have a pickup sensor on plug 6 but i heard its not really necessary. I did have to make an adapter to use the 87 harness in my 85 car by splicing the two connectors, other than that everything should be working properly.
-
-Alex -
If the fuel pump isn't turnig on maybe you have he CPS plug and the other plug next to it switched around I forget what it's called. I wasn't getting my fuel pump to turn on when I rebuilt the head on my car. There was also a fuse in the trunk next to the battery that was blown out on my car.Originally posted by blunttech -
thats actually exactly what it was. right after posting this (on every forum none the less) i figured out it was in the wrong plug.. lolOriginally posted by Killacortes View Post-AlexComment
Comment