raising revs?????

[Gordon1987]

How can i raise my rev limit from 5000 to 7000..... i have an E computer 027

[davem]

u can't

[MTechnikII]

you might / will bend a/couple of valve, for higher rev you need stiffer valve springs plus electronics that can control the fuel and ignition at that RPM
Henry

[Myster-E]

you might / will bend a/couple of valve, for higher rev you need stiffer valve springs plus electronics that can control the fuel and ignition at that RPM
Henry

You mean valve float?

[blocke]

Buy an "I"

[lolcantturn]

Buy "How to search for Dummies"

[blindwOw]

do this

http://www.r3vlimited.com/board/showthread.php?t=100939&highlight=motronic+1.3

[matt0300]

megasquirt

[MR 325]

you might / will bend a/couple of valve, for higher rev you need stiffer valve springs plus electronics that can control the fuel and ignition at that RPM
Henry

The Eta cylinder head physically CAN NOT rev that high. Nothing will bend or break, it just won't do it.

megasquirt

Not even Megasquirt can make an Eta engine rev that high. Super awesome suggestion though.

[Gordon1987]

its an I head i just have the e computer. im trying to avoid the I computer

[Gruelius]

put in a 4cyl cluster.

[MR 325]

its an I head i just have the e computer. im trying to avoid the I computer

The ONLY way to make it do what you want is to swap an i harness and computer. You'll also want the i throttle body, intake manifold, and injectors if you don't have them. Along with the i AFM and crank sensor.

Not sure why you're "trying to avoid the i computer. Swapping the harness and all other parts I mentioned above can be done in one day easily.

[matt0300]

How different are the harnesses?

[MR 325]

Completely.

[acolella76]

very different, very easy swap though. It took me about 20 minutes and 10 of that was drilling out that damn hole in the firewall