do you know what would cause the injectors not to squirt? i swap blocks in my car and i have everything together, if i pull the fuel line there is pressure and if i put fuel in through the intake it fires.but not on its own... why?
fuel injection
Collapse
X
-
Tags: None
-
edit: nevermind.
check the injector harness below the intake manifold. sometimes it's not screwed in properly. It is keyed, however.'84 318i M10B18 147- Safari Beige
NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
Turbo: 221whp/214ftlbs, MS3x flex @ 17psi -
Injection woes
Depending on your year you may not have that connector, if you do, take it apart and clean it with some good contact cleaner. If you don't have that connector worst case you may a have a dead DME for the injectors....like I do right now. Good luck!Comment
Comment