If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Trace it back. Plug to wire. Wire to distributor cap. Distributor cap to rotor, rotor to wire, wire to coil, coil to harness, harness to ECU, ECU to inputs that control spark.
Start simple, then move up. Troubleshoot and diagnose.
Trace it back. Plug to wire. Wire to distributor cap. Distributor cap to rotor, rotor to wire, wire to coil, coil to harness, harness to ECU, ECU to inputs that control spark.
Start simple, then move up. Troubleshoot and diagnose.
Checked them all, everything is fine, exept for that when the car is switced on, the power to the ignition coil it is 12v but when i start the car it drops to 7v. Is that supposed to happen?
Hope you can understand me, im from iceland and my english isn't the best....
Comment