m10 to m20 swap what else do i need?

[kman_e30]

im picking up an m20 from a friend/forum member this weekend. i just want to make sure im not missing anything.
list
m20
trans
drive shaft
radiator
harness
ecu
relocating battery to the truck
im going to do hockey puck engine mounts, i might do the trans mounts like this too
i also heard to rewire the fuse box plug or something like that
anything else i need to get?

thanks for the help guys

[jp_slick]

You have to make a harness adapter for the plugs by the fuse box.
Lucky for you there's a guy out in moval with a white bucket that made 2 of those already.
I take it you want to run the b25 cooling system.

[Cabriolet]

a medium diff. and 1/2 shafts.
b25 exhaust.

[kman_e30]

a medium diff. and 1/2 shafts.
b25 exhaust.

i already did a 325is rear end conversion. subframe, arms, disc brakes, sway bar, etc. im also running a medium case 4.10 welded diff(drift car) as for the exhuast im going to run a 2.5 single setup with a magnaflow and i might do side exit

thanks for the input though

[kman_e30]

You have to make a harness adapter for the plugs by the fuse box.
Lucky for you there's a guy out in moval with a white bucket that made 2 of those already.
I take it you want to run the b25 cooling system.

im getting the whole b25 cooling system with the parts from my im getting from my friend. dont i have to go from the square plug to the round plug?

[jp_slick]

Yup, nick has one of those in his car.

[kman_e30]

Yup, nick has one of those in his car.

hey did i sell you a 3.73 lsd?

[rustieE30]

hello there friend =)

[kman_e30]

hello there friend =)

russel?

[jp_slick]

hey did i sell you a 3.73 lsd?

Ohh yea that's me lol

[kman_e30]

lol, i was like how's this guy know i know nick? then was like he lives in riverside and the car in his sig looks familiar lol

is that dude with the adapters on here?