PSIK Improvements and turbo uses

[brody]

Hey guys,

We have been busy making another batch of PSIK's for the new year. We had a few customers express their distaste for the original PSIK rubber elbow and we have taken their opinions to heart.

Seen in this thread: http://www.r3vlimited.com/board/show...=179578&page=4

We have gone and made a beautiful silicone elbow with integrated ICV port to really polish up the installed look of the PSIK.



These new silicone elbows are a great piece not only for the PSIK but for turbo applications too! Because of the 5 ply reinforced silicone, these are a much cleaner alternative to welding a bunch of bungs and using more hose clamps for your ICV.



These elbows are available exclusively through Miller Performance and now come as standard equipment for the PSIK.

These elbows are also made in the USA. We try our best to keep all our components coming from on shore companies!

Featuring:

- 5 Ply reinforced Silicone
- Integrated ICV port
- 3" inlet 2.7" Outlet for M20 throttle body
- Oil resistant
- Made on shore in the USA

[Denny]

Hey Brody

Great work on these!

I have the original PSIK, I have to agree this is a great improvement.

[Pedaaa]

Looks Nice.
Do you have any photos how it looks installed?

[mccor023]

Are these also to attach the MAF to tb?

[brody]

Will have photos soon, but to get the idea of what it used to look like Check out the thread showcasing its development : http://www.r3vlimited.com/board/show...=179578&page=6

These won't work for just a MAF because of the ICV port location. It would make you MAF point down at a steep angle which is what the PSIK needs and turbo charge tubing but not the MAF by itself unfortunately.