OK so i was out drifting the other day and the car died literally in the middle of a drift and wouldnt restart. I do not here the fuel pump so i puled fuel line off at pump and no fuel. So then i i throw a 12v source on the pump and it works. i havent checked the pressure yet. So know while i have the 12v on the pump pumping fuel and i turn the car over it still wont start. So then i took 12v off the pump hooked back up the connector and threw starting fluid in it and she runs with starting fluid but not with an external 12v power source while trying to start. Any one have any suggestion? The car is an 86 325es manual thanks
UPDATE: 3-13-12
I have spark. I have 12v to the main engine relay and i have 12v leaving the relay with the key in the on position. Now at the connector to the ecu with the key off i have no power to any of the pins. With the key in the on position i have maybe max 1.5v on 2 pins. I had the key in the on position and jumped the fuel pump relay (farthest to the right) and checked voltage at the fuel pump under the car and had nothing. Any suggestions? im stumped all fuses are good. I have checked and rechecked.
UPDATE: 3-13-12
I have spark. I have 12v to the main engine relay and i have 12v leaving the relay with the key in the on position. Now at the connector to the ecu with the key off i have no power to any of the pins. With the key in the on position i have maybe max 1.5v on 2 pins. I had the key in the on position and jumped the fuel pump relay (farthest to the right) and checked voltage at the fuel pump under the car and had nothing. Any suggestions? im stumped all fuses are good. I have checked and rechecked.
Comment