will seta pistons fit in any 2.7 block

[e30m20TurbO7]

i have a e block with eta pistons in it
with the seta pistons fit in the eta block with the seta rods
so eta crank seta rods and pistons combined with 885 head lmk ??

[SpecM]

yes, that is practicly what BMW did anyway

[MR 325]

There's no difference in the i, e, and super e blocks.

[e30m20TurbO7]

There's no difference in the i, e, and super e blocks.

soo there all the same.
so for example to to clear it up it
a b25 piston and b25 rod and b25 crankshaft will fit in a eta 87 long block
because i have a good condition block

[SpecM]

Yes it will work

There are small differences in the way the main bearings got oil. SO if you do this buy main bearings to match the block, not the crank.

Sent from my Vortex

[e30m20TurbO7]

appreciate it
the well needed info

Yes it will work

There are small differences in the way the main bearings got oil. SO if you do this buy main bearings to match the block, not the crank.

Sent from my Vortex