m20 tourqe pecs Help please 5 dollars

[e30m20TurbO7]

soo i dont have any tourqe specs for the rod bolts the crank main bolts
timing cover bolts crank dampner cover bolts ect
water pump spec
i dont have a bentley manual right now it was stolen or something dissappeared but if any one could help me out il pay pal them 5 bucks

[buguhrich]

Rod Bolts - 20 Nm plus an additional 70 degrees
Main Bearing Caps (nuts) - 58-63 Nm
Front End Cover to Engine (bolts) - M6 9+-1 Nm
M8 22+-2 Nm
Vibration Damper to Crankshaft (nut) - 22+-2 Nm
Vibration Damper Pulley to Vibration Damper (bolt) - 22+-2 Nm
Rear Crankshaft Oil Seal Carrier to Engine - M6 9+-1 Nm
M8 22+-2 Nm
Upper and Lower Timing Chain Covers and Drive Belt Covers to Engine - M6 9-11 Nm
M8 22+-2 Nm
Water Pump to Engine - 22+-2 Nm

Don't worry about the 5 dollars. I hardly use paypal anyway

[jlevie]

I hope you know that the rod bolts are torque to yield and must be replaced each time they are loosened.