need some help

[Eurotrash727]

whats with the buttsplice connectors in you first pic is there any other aftermarket wiring going to anything important, non-stock stuff like that is always what i check first

Thats the only thing that iv seen ill check them out & see what they run to, There are a couple plugs that lead to nothing that iv wondered about, ill post some pics when i get home in the morning.
Shit is so weird that the car run fine i drove it home like 30 miles & drove it for 2-3 days then one morning nothing.

[Eurotrash727]

Those wires just run to the brake sensor that isn't even there , that's all the wiring that's not factory

[Quinthirty]

Check on the sockets beneath the three relays. They can sometimes become loose especially when the PO said he just wiggles it.

[barry]

Get some CRC cleaner and spray your connectors
GL

[Eurotrash727]

Check on the sockets beneath the three relays. They can sometimes become loose especially when the PO said he just wiggles it.

Everything seems to be in contact, gonna get CRC cleaner tomorrow & try cleaning the connectors.

[Eurotrash727]

so after pulling every relay off its lil mount piece and inspecting everything looked to be fine, so had my roommate try starting while i messed with the relays after messing with them one by one as i was messing with one it almost turned over so i kept messing with it & i got it started & running...so if its the actual connection to the harness & clip how would i go about fixing this? i switched the relays to see if it was the relay its self and its not.

[Eurotrash727]

Wonder if the relays i have are just toast? I tried to start the car again & messing with the relays wouldn't do the trick. Again i checked all the wires That they connect into everything seems fine.