K so i just bought a m20b27 from a junk yard and,well,.......they sold me junk... .go figure any way i put the motor in started it and it went......tic tic tic then just stopped trying to turn over i put a breaker bar on the crank pulley and i can turn it by hand 3.1/4 in either direction but it sounds like its smacking something in the top end........did i suck a valve through? Or can any one think of any thing else it could be any thing will help thanx*
-
Those who stand for nothing will fall for anything. 1985 e30 325e chipped 4:10 lsd forged control arm bushing and old ass bbs weaves. 1966 ford galaxie 500 XL 390. 1982 e21 320i........not running. :wgaf: -
Is the timing belt good? There is probably a broken valve shoved into the bottom of the head!The difference between porcupines and BMWs is that porcupines have the pricks on the outside! -
I am guessing it ended up in the junk yard in the first place because of a broken timing belt. This would have FUBAR'ed the top end of the engine. I am guessing you need a rebuild on that engine.sigpic
-----
Zinno 87 325iSComment
-
Ya timing belt is fine i bought a new any way luckely enough i have a nother head so i guess its rebuild time but the junk yard is giving me an i head and a bunch of yard credit so i guess its time to turn my other eta block turbo but ya i was thinking the head was screwed just hoping for any other suggestions....... thanx guysThose who stand for nothing will fall for anything. 1985 e30 325e chipped 4:10 lsd forged control arm bushing and old ass bbs weaves. 1966 ford galaxie 500 XL 390. 1982 e21 320i........not running. :wgaf:Comment
Comment