Announcement

Collapse
No announcement yet.

M20 Starts and Stalls

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M20 Starts and Stalls

    Hey, I'm having a problem with my motor firing up for a second then stalling out. If I leave it for 10 min and fire it, it will run for about 5-10 seconds and its really boggy. Once it dies and I go to try again it will just sputter and maybe fire for a second if that. I've tried everything that's why I have come here.

    So Far....

    -Replaced the fuel filter

    -The fuel pump does have power (I even jumped the pins on the relay so it's on constant and the same problem occurs)

    -Cleaned and replaced ICV

    -Replaced Maf

    -I never checked the fuel pressure at the FPR with a guage but upon taking off one of the FPR hoses there is lots of pressure there.

    Any ideas??
Working...
X