alright guys so my 87 325i is acting. first it was a slight stalling dead across all 6, replaced the CPS and it seemed to go away. i tested the car only for an afternoon because i had to go back to school. came home two weeks later same problem. replaced said parts below all seemed to make it run better. now it has a what id like to describe as a dead "zone" from 3k-3500RPM, now it is not* very consistent and seems* to be only under load. car still has plenty of power and runs great except when it misses. its like the cars dies completely for a split second and then its alive. causes a jerking motion when it happens. ive been trying to figure this out for a long time but first here is a little history on my car
87 325e
swapped to 173dme and now a 2.7 stroker. just a heads up to give you guys some kind of idea.
new plugs
new CPS
new AFM
same old problem. can someone shed some light??
87 325e
swapped to 173dme and now a 2.7 stroker. just a heads up to give you guys some kind of idea.
new plugs
new CPS
new AFM
same old problem. can someone shed some light??
Comment