Announcement

Collapse
No announcement yet.

M20, stalls in higher RPMS?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M20, stalls in higher RPMS?

    So i have a 87 325is, This problem has recently occurred, and im not sure what it is, i changed the inline fuel pump, and the intank fuel pump, and i even swapped out ecus, im not sure what it could be, it has seemed to get a little better, but its still doing it, it also has a rough idle, if that means anything, thanks,
    also, i dont know the exact rpms, because my tach is not working, but it will not hit limiter, if i had to guess, maybe around 4500.

    My question is, does anyone know what it could be? maybe the AFM? im not sure.
    sigpicInstagram: bir_madhatter
    Add me on Facebook: https://www.facebook.com/connor.mcco...57?ref=tn_tnmn

    #2
    Check the switches in the TPS. If the WOT switch is bad the engine will struggle above 4500rpm.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment


      #3
      thanks man!
      sigpicInstagram: bir_madhatter
      Add me on Facebook: https://www.facebook.com/connor.mcco...57?ref=tn_tnmn

      Comment

      Working...
      X