Flywheel position sensors, need some help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • lowsodium
    replied
    Got it. Finally found it in the Bentley

    Leave a comment:


  • lowsodium
    replied
    Originally posted by jlevie
    Yes it matters.
    I have 2 female harnesses: black and white colored. There's an upper and lower flywheel harness.

    Which one goes to which harness?

    Leave a comment:


  • Chuck C
    replied
    One of the sensors--TDC, I think--and it's corresponding connector on the engine harness, has a small wire tie near the connector. If those are missing, just plug in the sensors and see if the engine starts and runs OK. If not, reverse the connections.

    Leave a comment:


  • jlevie
    replied
    Yes it matters.

    Leave a comment:


  • lowsodium
    started a topic Flywheel position sensors, need some help!

    Flywheel position sensors, need some help!

    I have a 87 325e i just put a new engine into. I have the 2 sensors coming off the flywheel that plug into the wiring harness on the drivers side.

    Both plugs are exactly the same and im wondering how do I tell which one plugs to which female harness? Does it even matter?
Working...