Flywheel position sensors, need some help!
Collapse
X
-
-
One of the sensors--TDC, I think--and it's corresponding connector on the engine harness, has a small wire tie near the connector. If those are missing, just plug in the sensors and see if the engine starts and runs OK. If not, reverse the connections.Leave a comment:
-
Flywheel position sensors, need some help!
I have a 87 325e i just put a new engine into. I have the 2 sensors coming off the flywheel that plug into the wiring harness on the drivers side.
Both plugs are exactly the same and im wondering how do I tell which one plugs to which female harness? Does it even matter?Tags: None

Leave a comment: