Just got an eta and sometimes the car starts right up fine and idles great. Then if you start it again it will start but when key is switched from start to run it stalls right out. I replaced ign switch and still has this issue.
Sometimes the starter doesn't even get juice from start position yet starter turns eith 12v jumped to it.
If I'm lucky and rev the car during its immediate stall nonsense it will rev up missing like crazy as if it ran on only a few cylinders and stall if you let go of the gas.
I am assuming wiring issues post ign switch any other ideas?
Sometimes the starter doesn't even get juice from start position yet starter turns eith 12v jumped to it.
If I'm lucky and rev the car during its immediate stall nonsense it will rev up missing like crazy as if it ran on only a few cylinders and stall if you let go of the gas.
I am assuming wiring issues post ign switch any other ideas?
Comment