dme signal from ignition to dme relay?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • superboosted
    Mod Crazy
    • May 2012
    • 667

    #1

    dme signal from ignition to dme relay?

    Can't get the dme relay to kick.

    Ecu good
    Fuel pump runs when jumped
    Will just crank

    What excites the dme relay? I can get it to click if I ground pin 36 from the ecu.. wtf? Stumped.

    Pinned out all the power and grounds from the ecu connection,all good.
  • jlevie
    R3V OG
    • Nov 2006
    • 13530

    #2
    What car do you have. Early cars (through 8/87) route the START signal to the DME via C104, but on later cars it goes through C101.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment

    • superboosted
      Mod Crazy
      • May 2012
      • 667

      #3
      11/87 I will test there. And the start signal,pin 26 that also runs through the obc,I see.

      Comment

      Working...