M20b25 rebuild for boost

[e3irsty]

My compression test shows a lack of compression in a few cylinders compared to others so I believe it will be time for a rebuild soon. I want stock motor. Arp head studs and not sure what else is great for m20 holding boost but keeping engine mostly stock.

If someone could explain all the basics that I would need done from a machine shop and new parts I would definitely need. That would be great. Plain on using kamotors turbo kit and 400hp should be around the max. Want daily driven aroumd low 300's hp

Sum it all up. What is needed for basic rebuild. Parts and machine shop. Thanks, Vito

Sent from my LG-LS980 using Tapatalk

[e30 gangsta]

Search! If you are not willing to take apart the m20 and fully rebuild it, rings, bearings etc. you might want to look into purchasing a good running m20 for less than $500 and boosting that, it will be a a lot cheaper and less work. And arp's should be on any motor you decide to boost.

[e3irsty]

Search! If you are not willing to take apart the m20 and fully rebuild it, rings, bearings etc. you might want to look into purchasing a good running m20 for less than $500 and boosting that, it will be a a lot cheaper and less work. And arp's should be on any motor you decide to boost.

Trust me I have. I found how to's for taking apart the head and lots of other things. My motor runs really well! But after a compression test. Know it's not well enough for boost. Im only getting arps because I believe everything else stock will hold enough power for me and having a stock head gasket will let me know im pushing the motor to far if it decides to blow

Sent from my LG-LS980 using Tapatalk