Hey i have a 5 speed swapped car, and recently picked up a used turner chip that my car is in the year range for.. Installed it correctly, but it won't turn over just cranks and cranks, looked at the chip and saw that it says manual trans on it. Didn't think twice when i first saw it, but could it be interrupting the chip? Chip being for a manual and all, and my car once being an auto?
-
1991 325i Mtechnic : : 1995 Jeep Wrangler : : 2008 Audi A8l
2016 Triumph Scramber : : 1970 Honda CL350 x2 : : 1974 Honda XL 350
1975 BMW R75/6 : : 1946 Ben Hur Jeep Trailer
-
if e30. manual and auto chips are the same.Much wow
I hate 4 doors
-
That's what I thought, until the chip read manual trans on it..1991 325i Mtechnic : : 1995 Jeep Wrangler : : 2008 Audi A8l
2016 Triumph Scramber : : 1970 Honda CL350 x2 : : 1974 Honda XL 350
1975 BMW R75/6 : : 1946 Ben Hur Jeep Trailer
Comment
-
I've never heard of a chip being specific to AT/MT, but that doesn't mean it doesn't exist. Are you 100% sure the chip is installed in the correct direction? I'd try flipping it 180* and trying again.Comment
-
Agreed motronic 1.1 and 1.3 both use the same computers regardless of auto/manual trans
Try to swap the stock chip back in to confirm that there isn't a problem with the ecu, you could have damaged it installing the new chip.Shawn @ Bimmerbuddies
Bimmerbuddies LLC
717-388-1256
2971a Roundtop Rd, Middletown PA 17057
bimmerbuddiesllc@gmail.comComment
Comment