Oil filter housing oil cooler thread size for adapters

[aaron_tupper]

Whats the oil filter housing oil cooler thread size where the oil cooler lines screw into the housing? Id like to get adapters and run aftermarket lines to a aftermarket oil cooler.

[jlevie]

I don't know what the threads are, but I have an aftermarket cooler on my race car. I had a hydraulic shop put hoses on the stock pipes that go to the adapter and AN fittings on the other ends.

[aaron_tupper]

I don't know what the threads are, but I have an aftermarket cooler on my race car. I had a hydraulic shop put hoses on the stock pipes that go to the adapter and AN fittings on the other ends.

okay cool thanks

[SkiFree]

This was talked about just the other day.


In addition to that discussion the threaded piece on the block is 3/4 16 (same as ford). You might find this helpful.

http://www.r3vlimited.com/BOARD/showthread.php?t=211891&page=15

[aaron_tupper]

This was talked about just the other day.


In addition to that discussion the threaded piece on the block is 3/4 16 (same as ford). You might find this helpful.

http://www.r3vlimited.com/BOARD/show...211891&page=15

thanks man!