Headgasket/cylinder head rebuild kit?

[deeze30]

I have been looking around online for either OEM bmw or Goetze headgasket but all I can find or see are VR stuff which from what I have been reading about are crappy and does not last. I know that stealerships would have them but I wanted to see my options online first. I found an OEM HG from ebay but specific for 325e, not the same as 325i?

Where's a good place to buy a set/kit from? With HG, valve seals, all the gaskets etc? Or it's better to buy them separately? If so what pieces do i need for the rebuild of my 885 head? Buy HG by itself then VR set/kit for the rest of the stuff?

[george graves]

Blunttech

Email sales@blunttech.com - in the subject line put something like "attention: Steve - need OEM or better quality HG/re-gasket kit for m20b25"

He'll hook you up. He's a great resource when you have a specific need. Otherwise his website is easy to find most common parts without email.

I'm sure other will chime in as well as to the manufacture you should use.

[baconandwhiskey]

http://www.pelicanparts.com/catalog/SuperCat/0192/BMW_0192_BASFLT_pg4.htm#item16

[george graves]

http://www.pelicanparts.com/catalog/...pg4.htm#item16

Mmmmm. Valve cover gaskets. Nice!

[deeze30]

Thanks! I'll email him asap

As far as valve cover gaskets, I've never heard of any being bad? correct me if i'm wrong here.

[MR 325]

The Elring set is also quite nice. We use them on most of our builds. Available on our website.

Feel free to email with any M20 questions. Happy to help!