need help with hoses

[jakestyles]

hey guys i drive an 87' 325es

i need some help on where all the hoses go, throttle body and where thermostat is. i have looked and researched everywhere and i cant get a schematic or a print on anything.

i need to know where the hose from the canister (near master cylinder) goes and also the two bottom hoses from the thermostat.

i cant find it anywhere.

thank you

[Reichart12]

Try Realoem.com

If it wasn't raining right now Id go look for you because I don't know for 100% but heres a diagram from that website. Should help you line things up more.

[long tall eta]

this one is specific for your e car.
eta cooling by robert_elliott54, on Flickr

[Reichart12]

Should be the same diagram, both versions are shown for me under the settings I have giving the 325i title.

[turbo55]

For the canister (note these are fuel hoses):
-a hose comes into the canister from the hard plumbing coming from the gas tank (this is for gas vapors for evap control)
-a hose comes out of the canister and to a solenoid valve (which also has a electrical connector going into it to activate the solenoid) and from the valve there is a hose going right to the bottom of the throttle body

Throttle body (coolant):
-hose coming in is from the very back of the engine, right under the #6 intake
-hose coming out goes to the thermostat housing