Announcement

Collapse
No announcement yet.

No Start Issue - voltage dropped with key in 'on' position

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No Start Issue - voltage dropped with key in 'on' position

    My 87 325is would not start because when I turn the key to 'accessory' or 'on' position, the voltage went from 12.4v to 9v. I tested individual circuit (green and purple wires) to try to find the short, by disconnecting ignition switch then jumper red and green/purple wires, but couldn't. I also did the 'load' test on the battery. Yes, I tried 2 different ignition switches with same results. Anybody got any idea what it is?

    Thanks in advance.
Working...
X