M20 with BTB manifold and DBilas tb's

[Jean]

In the No.9/2006 of performance bmw there is a black e30 325i with an interesting m20 engine. Reported to have 260hp/217lb at 5500rpm.

I would like to know more about the intake manifold , here is the information regarding it's engine: (p54).

2.5l with 2.8 m50 lightened and balanced crank, JE high-compression custom forged pistons, gas-flowed head with standard size valves, Schrick 288/288 cams with adjustable Vernie pulley, Dbilas Dynamic throttle bodies, 3.5 M30 fuel injectors, MBE Motorsport engine management system on a plug and play loom running a DIS distributorless ignition, BMC Carbon Dynamic Airbox, BTB six-branch manifold with X pipe and Powerflow back box, standard BMW centre section.


I'll take a picture of the engine show if anybody is interested, it looks like an S14 ITB setup but for an M20.

[Kobe Diesel]

I thought it was an M20, and the M50 was a misprint

[mtechnik]

That owner of the car recently joined on here AND posted pics.

[Van Westervelt]

indeed he did join. (see below) it is an m20 with a modified m20 crank i beleive

There is also an entire thread on that intake and ITB setup. SEARCH!!!

http://www.r3vlimited.com/board/showthread.php?t=71055&highlight=Dbilas

[Jean]

Thank you! I did not see that thread , but was suprised in a good way to see those numbers! :)