M20 pistons

[JasonC]

^^^you can go ahead and take them. I'm going to get an 323i head.

[ColdAccord]

my pistons are designed for use with 325i rods, of which I also have a set for sale

[Swede-E30]

I bought a new set of 325i pistons for under 400 bucks. Use you Eta crank, rods slap an I head on and shave your block to compensate for the rod length. I know most of you wont agree with me on this, but it works. Very well too! :)

[StereoInstaller1]

I bought a new set of 325i pistons for under 400 bucks. Use you Eta crank, rods slap an I head on and shave your block to compensate for the rod length. I know most of you wont agree with me on this, but it works. Very well too! :)

What did you do about cam timing?

[Swede-E30]

I slightly moved the pin on the upper timing gear about 0.8mm. Best way would be to buy an adjustable timing gear.

[JasonC]

Who sells adjustable timing gears for M20's

[Swede-E30]

BMP and a few others sell them at a rip-off price. Other then that I've heard of a new web site called www.Google.com[/url], they might have it ;-)

[Swede-E30]

This is a good place to look for this type of build

http://wp1016621.wp027.webpack.hoste...m20seite34.htm

[Sean]

If I had had the money, I woulda gotten some Metric Mechanic pistons, but I'm just running my SuperEta pistons now :)