EAT (Mark D) Chip Question

[rcko]

I noticed their site list a 17, 19lb injector chip for use with 91 octane and 6.9k rev limit. Is there a version of the chip available with special mapping for the 19lb injectors in addition ei AND a m30 AFM (the 027 part number version)?

Any one out there with power up from such chip? + hp + torque? I found the thread for the dyno sheet with the stock injectors and 7100 rev limiter but nothing for a 19lb plus M30 AFM

[Fidhle007]

I've been asking that same question for months and even went so far as to email Mark directly. Still no answer.

Finally I got fed up and bought a used 93 Octane/stock injector chip and that seems to work well enough for now. :)

[rcko]

I contacted EAT and spoke with Mark. Currently he does not have a chip for an M20b25 with an M30 AFM and 19lb injectors. He did state that the chip for the 19lbs with M20 AFM will work. He would needs a volunteer car with the 19lbs and M30 to dial a chip for this setup.

[Fidhle007]

What's up with his MAF conversion, does anyone know?

[e30devo]

well thats funny, i was told by mark that he had a chip for 19lb and m30 afm.. and i ordered it. and i used it. and then i sold it.

[rcko]

yeah thats funny... cause I asked specifically for an 19lb M30AFM chip and was told it was not avail but that the 19lb M20AFM would work the same... thats what I got and it works