If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Im considering buying a used m20 thats out of the car. Can the m20 be cranked for a comp test w/o a tranny connected? Im hoping to just need a starter and batt connected.
Im considering buying a used m20 thats out of the car. Can the m20 be cranked for a comp test w/o a tranny connected? Im hoping to just need a starter and batt connected.
tia!!!!
yea dont see why not, not like you need it to go anywhere, and if you plan on running it for a while, then put a hose with water flowing into the thermostat housing. i am not sure about a 2.5, but the eta motor is supposed to have 149 pounds of compression brand new.
yea dont see why not, not like you need it to go anywhere, and if you plan on running it for a while, then put a hose with water flowing into the thermostat housing. i am not sure about a 2.5, but the eta motor is supposed to have 149 pounds of compression brand new.
I ve been told by 2 shops it DOES need tranny hooked up....hmm
Comment