Announcement

Collapse
No announcement yet.

chip help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    chip help

    im looking into buying a mark-d chip for my 87 325is and i have an ecu # of 153 and i need a 173 to instal the chip that i wanted, i can get a 173 ecu for cheap from a friend, but will it work on my car if so will it be a plug n play? thanks for the help guys

    #2
    from what I understand, the 173 is an updated version of the 153, and they are interchangable. Can anyone back me up on this?
    sigpic

    Comment


      #3
      That would be correct. You can swap the 153 DME for a 173.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment


        #4
        I have a different chip question. What is the performance/mpg gain differential between the 91 MarkD and the 93 markD. Is it worth the extra $$ per gallon to go for the 93? Thanks

        Comment


          #5
          I'm sure it's worth it, just as long as you can get 93 octane fuel where you are. Out here in California, we only get up to 91 octane. I don't know what it's like out your way though. If you can get 93, I say go for it.

          Comment


            #6
            Originally posted by jlevie View Post
            That would be correct. You can swap the 153 DME for a 173.
            Yes the hardware is interchangeable, but the software is NOT.

            You can not take a chip from a 153 and run it in a 173, or vice versa.

            MarkD
            URL: www.dsylva-tech.ca

            Comment

            Working...
            X