Can't pull codes, TPS is good

[TXBDan]

Hey guys,

I have any '87 325is w/ a 173 DME. Runs like a champ. For kicks i want to chec, the codes.

When i turn the key to 'on' (engine off, the state where all the warning, CEL, Brake, oil, etc lights are all lit up) and press the gas 5 times, nothing happens. the CEL was lit and stays lit. What am i doing wrong here?

I checked the TPS today and i get proper closed connections across the pins at idle and at WOT.

[jlevie]

Are you checking TPS operation with someone in the car pressing the accelerator to WOT and then releasing it?

[yoda634]

You might be pressing the pedal too rapidly/slowly -- should take about 5s for you to mash it and release it 5x. Also, make sure you're pushing it all the way down.

[//MPower]

When i turn the key to 'on' (engine off, the state where all the warning, CEL, Brake, oil, etc lights are all lit up) and press the gas 5 times, nothing happens.

I am having the same problem, was there any conclusion to this?