M20 wiring pics requested, fixing fire damage

[buzdof]

I'm asking someone to please take a picture of the wiring for the sensors on the thermostat housing. I'm not very confident in my labels on the bare wires I have. Thanks!

[mattdk318i]

What caught fire? The Fpr?

[buzdof]

Exactly...

[mattdk318i]

damn, Let me know if you need any parts. I dont have an "I" head. But ive got everything else, including the harness
(i know yours is a Eta)

[SpecM]

my recomendation: pick up a used harness. 10x easier that tring to fix that.

good luck either way

[buzdof]

I have everything I need to replace the wiring, I just want to make sure I have the correct wires going to the different sensors.

[jmc1590]

I would take this in two steps: identify each sensor then verify the wiring.

Realoem.com would be my recommendation to identify each sensor.

Then use an ETM for the wiring.

James

[redhatpat]

my recomendation: pick up a used harness. 10x easier that tring to fix that.

good luck either way

I 2nd that.

[Kingb]

my recomendation: pick up a used harness. 10x easier that tring to fix that.

good luck either way

There is a ETA at the junk yard here. I can pull the harness and ship it.
let me know.