Valves - time to do them

[rmousir]

not a bad idea. Thanks for sharing.

[Moto-Mucci]

while your in there you can do plugs, wires, blow by hose (on top of the valve cover), and if needed a new valve cover seal. You might also want to paint the valve cover. I will be sure to do that next time. Those are the things you will directly touch by doing this job.

HopeThatHelps.

I meant as far as engine internals go, what would benefit from replacing / upgrading while I've got the head open.

Good info Stereo.

[rmousir]

not sure on that.

you won't actually have the head open.. just have the valve cover off.. so you could change valve seals.. maybe even the valve springs.

[Moto-Mucci]

Made my own thread, I'll stop jacking yours.

[StereoInstaller1]

I also put the damn thing up on jackstands so it is easier on my back

[Goggles Pizano]

Valves will not close completely when the motor gets up to running temp. if they're adjusted too tight. THEN it will run like crap and no power. Do it by the book for best results. Seriously.

[movementality]

i need to do some valve adjusting soon too...