Announcement

Collapse
No announcement yet.

A/C Compressor question

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    A/C Compressor question

    This question is for those who are using M30B35 specifically.

    What is the part number on your A/C Compressor? Is it OEM or aftermarket with aftermarket kit bracket?

    I am trying to confirm also if the E24 635csi/ E32 735i and E34 535i cars all came with the same compressors.

    I might have to source one as the one that came with my engine is questionable.

    Thank you
    Last edited by Jean; 04-21-2009, 05:25 PM.
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
    Tags: None
    #2
    I'm running A/C on my m30 swap - part No. 64528385712 - I believe the m20 compressor will work, just the mounting brackets are specific to the motor ie: m30b35, m30b34, m20b23, m20b25 etc...

    Just to let you know, you will have to run your m30 in position 3 to clear the a/c, power steering pully as it is sits very close to the radiator (closer than rotor cap) I'm running custom mounts.
    ///Monstrosity. (OO≡≡[][]≡≡OO)

    Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

    Comment

      #3
      Joe's B35 mounts. I would really like A/C to work. We'll see how it all fits I guess :)
      Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



      OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

      Comment

        #4
        Originally posted by Jean View Post
        Joe's B35 mounts. I would really like A/C to work. We'll see how it all fits I guess :)
        I'm pritty sure you will have clearance issues with joe's mounts (too far forward.)
        ///Monstrosity. (OO≡≡[][]≡≡OO)

        Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

        Comment

          #5
          i need to fit a compressor back onto mine.
          I have a compressor and mount from a 89 535 and a mount and compressor from my 84 325i (eta)
          these need to fit onto my 90 325i swapped to M30

          Comment

            #6
            Originally posted by weaksauce View Post
            i need to fit a compressor back onto mine.
            I have a compressor and mount from a 89 535 and a mount and compressor from my 84 325i (eta)
            these need to fit onto my 90 325i swapped to M30
            Providing the engine in your car is a m30b35 - the '89 535 brackets should work fine with either compressor.
            ///Monstrosity. (OO≡≡[][]≡≡OO)

            Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

            Comment

            Previous template Next
            Working...
            X