Announcement

Collapse
No announcement yet.

Getrag 265 + Driveshaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    i gotta agree with Doughnut about the g265 being much less pug and play...

    the g260 behind the b34 with funks mounts uses a stock 325e large guibo DS and stock shift linkage and carrier...

    LowR3v'n you have been right all along we need a more comprehensive and correct thread from people who have actually done the swap... and what they use for their specific situation. There is just to much mis information floating around..

    Need Illustration or Design work? www.robbiebyerly.com

    Comment


      #17
      Well I should be working on mine more this weekend so I will report back with what I find out.
      $500, Diamantschwarz, and a Dream

      Comment


        #18
        Why most of them ( shop) refuse to modify BMW driveshaft ?
        The front half of small - guibo eta driveshaft is 2 1/4 inch too long ( measurement from the guibo face to CSB mounting hole / on car )
        http://www.kingofeurope.net/2010/

        Comment


          #19
          IIRC Because the driveshaft parts are fused together
          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

          Comment


            #20
            That's what i thought, and some shop will charge a fortune to get it done ( they probably gonna send it to the 3rd party?)
            Other than DriveshaftsDOTcom , anyone knows ?
            http://www.kingofeurope.net/2010/

            Comment


              #21
              Originally posted by drift View Post
              Why most of them ( shop) refuse to modify BMW driveshaft ?
              The front half of small - guibo eta driveshaft is 2 1/4 inch too long ( measurement from the guibo face to CSB mounting hole / on car )
              This flips me out that a shop would send you away just because the original joins on the DS are friction welded...

              A good reputable shop will simply weld the DS like any normal DS.

              I payed $150AU to have my DS modified and rebalanced.
              ///Monstrosity. (OO≡≡[][]≡≡OO)

              Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

              Comment

              Working...
              X