It's all good man, all in all I love the car and it's a complete joy to work on. I'm just astonished at how much your guy doesnt understand this stuff. It's remarkably easy compared to L-Jetronic and even a lot of other EFI stuff. There doesnt seem to be any permanent damage so I won't be parting it out at all, and I still don't regret the purchase in the least :) Hows Texas?
I'm pretty sure the pedobear thing is from my buddy, I didn't even know you had to have an account at imageshack...
EDIT: Next order of business, hopefully to be fixed this weekend, is the gearshift. If you'll all turn your attention to
http://www.realoem.com/bmw/showparts...26&hg=25&fg=05
looks like part #4 is cracked and letting part #1 slip out, causing extreme driver annoyance. It also looks like part #1 is a little too short anyways, so I may have to weld a little extension to it. Assuming, hoping, and praying the latter is not needed, I'll be participating in a rally put on by one of Kettering University's fraternities on Friday, July 31st. Pictures will most definitely be in order.
Yet another M30 E30 amongst your ranks. WHATS THE DIFFERENCE BETWEEN A PORCUPINE AND
Collapse
X
-
If it's what I think it is. It goes underneath the manifold and connects to a nipple on the bottom of the intake manifold. There should be 3. Could have been just knocked off when he installed the motor.
And this guy wasn't even on the diagram:
Upload, organize and share your photos with ImageShack. Fast, reliable image hosting with albums, privacy controls, direct links and resizing.
The larger hose it connects to is the PCV connection between the inlet and the valve cover. The RealOEM diagram for the PCV had the connection, but no sign of this little guy connected to it.
Geez..I also told the mechanic that he needed to fill the open nipples on the bottom of the intake mani.Last edited by Mastrcruse; 07-21-2009, 05:53 PM.Leave a comment:
-
I left those off because I was told that they didn't have to go to anything (the evap. wasn't important). Everything else seems to be stuff I was charged for getting done but seems like he forgot to do. I told him to button everything up and getting it working properly. He did say that he never wanted to see the car again unless I put the original motor back in. That right there though isn't shit compared to the condition I recieved it in but I wasn't trying to be sneaky so sorry about the problems. For $1200 you could just part it out I guess. It still boggles my mind that he only torqued them down to 45 ft. lbs or put the thermo in backwards. He has done all my e30's and have never ever had a problem.
This guy apparently decided that these next few hoses needed to go unplugged, and I show you them in their original state:
Upload, organize and share your photos with ImageShack. Fast, reliable image hosting with albums, privacy controls, direct links and resizing.
Upload, organize and share your photos with ImageShack. Fast, reliable image hosting with albums, privacy controls, direct links and resizing.
These first two, as I understand by one of RealOEM's diagrams, go to a large cylindrical doodad that I can only guess is a charcoal canister for evap.
It's a B34. The head is (I was told) a b34 head. I purchased it from Mossman on this forum about 2-3 years ago.
And I did forget to tighten down the nut for the steering wheel..I thought of that when you left. The correct spacers are in there (there should be 2). They were used to convert from an airbag car to a non-airbag wheel. Never tightened it down because of testing different clusters.Last edited by Mastrcruse; 07-21-2009, 05:44 PM.Leave a comment:
-
Just looked through the pics, looks like a rats nest there! Deff. you got some early m30 stuff in the mix of things.Leave a comment:
-
-
Sorry for the lack of updates yall, I've been in the process of moving and havent had a computer up and running for a while.
I plugged up all the vacuum lines I could find, and... Still running like shit. Then I unplugged the FPR and whaddya know, ran a lot better. Which meant she was getting a lot of unmetered air still. I plugged a new vacuum line into where the FPR connects on the bottom of the intake manifold and then noticed that the old hose was still plugged in down there. Looks like the PO also forgot to plug up 2 of the 3 bungs on the bottom of the manifold. I plugged them and the car now runs ABSOLUTELY PERFECT. Well aside from another air bubble in the coolant with the heater core still bypassed and no thermostat. If I dont have to fuck around with another cooling system again it'll be a wonderful thing.
I may very well have such a setup. I know compression numbers mean shit but I was getting about 150-155 on all cylinders, which means either pretty low compression or incredibly tame cam lobes. How would I know for sure?just from your engine pics,
there is some parts from the B34 and B35 on the top end alone,
that intake is from either very early B34 or something else..I dunno...
the hose coming out of the middle of the intake is throwing me off in addition to no 3.2/3.5 or 3.5...
Hopefully the PO didn't just take a B35 head and throw it on a B34 bottom end,
that would suck, dropping your compression very low...Good for Turbo, Not good for NA,
The stock HP/TQ for B34 (U.S.) is 184hp/214/tq, the stock numbers for a stock B35 are 208/225....
But the B35 seem to pull alot harder and is more fluid, the later 1.3 Motoronics helped alot
M30 motors don't come on until 3750 rpms, so you need to adjust your drving style to allow for that and learn to keep your revs up, a Mark D chip will help, but first you got to get it running...
Good luck, takes ballz to take over someone elses project...
once you get all the parts figured out, it won't take long....well, too long anyway...
Good Luck
super rich means that it is prolly running open loop so try to find the O2 sensor and get that all going...
If worse comes to worst I'll just turbo it. Hell, I have enough vacuum bungs to meter 2 turbos right now.
Also, no problems with rev control. My power in the little red honda doesn't come on until 6000. :P I'll look into said chip as well, but I'm seriously considering tuning it myself with an EPROM burner. I've always been interested in doing something like that.
Next line of business: Figuring out what the hell wiring harness I have so I can sort out the fuckup that is the tach and speedo. I'm pulling 7.75V at the connection to the speedo gear in the diff currently, though I can't really backprobe the speedo effectively without getting run over. I'll snap some photos of various wires if someone lets me know where harnesses are different.
Huh?Last edited by Adiabatic; 07-21-2009, 10:17 AM.Leave a comment:
-
Looks like it should be fun, any updates?
Also, pedobearod8?Leave a comment:
-
just from your engine pics,
there is some parts from the B34 and B35 on the top end alone,
that intake is from either very early B34 or something else..I dunno...
the hose coming out of the middle of the intake is throwing me off in addition to no 3.2/3.5 or 3.5...
Hopefully the PO didn't just take a B35 head and throw it on a B34 bottom end,
that would suck, dropping your compression very low...Good for Turbo, Not good for NA,
The stock HP/TQ for B34 (U.S.) is 184hp/214/tq, the stock numbers for a stock B35 are 208/225....
But the B35 seem to pull alot harder and is more fluid, the later 1.3 Motoronics helped alot
M30 motors don't come on until 3750 rpms, so you need to adjust your drving style to allow for that and learn to keep your revs up, a Mark D chip will help, but first you got to get it running...
Good luck, takes ballz to take over someone elses project...
once you get all the parts figured out, it won't take long....well, too long anyway...
Good Luck
super rich means that it is prolly running open loop so try to find the O2 sensor and get that all going...Leave a comment:
-
Pics!






Obligatory dirty garage shot, with bonus "project":


And now, the engine:


This guy apparently decided that these next few hoses needed to go unplugged, and I show you them in their original state:


These first two, as I understand by one of RealOEM's diagrams, go to a large cylindrical doodad that I can only guess is a charcoal canister for evap.
This seems to be right:


But of course after that cylindrical guy it vents.
Thoughts? Helpful suggestions? Clues to the mess that is the vacuum system? Gimme some feedback guys!Last edited by Adiabatic; 11-18-2009, 06:38 AM.Leave a comment:
-
On your non functioning IP, check fuse 21.
Do not use your eyeballs as a diagnostic tool, use a test light.
Electrical manuals here: www.wedophones.com >MANUALS>AUTOMOTIVE>BMW and I wish you much luck in understanding them...I have them down, but took quite a while!
LukeLeave a comment:
-
Should be 1985-1987 if I'm not mistaken. I don't know everything about the M30 yet :p. Now give me some pointers on how your M30 -> 318 is wired. I'm about to start on my wiring and it's making me crazy, haha.Leave a comment:
-
Yep, it's got those struts on it. Mystery solved!
EDIT: It looks pretty much exactly like your first picture. What models and years did that specific M30 come from? It would help me greatly with the vacuum lines and other various troubleshooting.Last edited by Adiabatic; 06-29-2009, 06:02 AM.Leave a comment:
-
Ok. Almost positive it is a B34 but how about this. There should be two "struts" that attach the intake manifold to the block. The B34 has them the B35 does not. In addition to that the strut towards the back of the engine has 2 flywheel speed sensors connectors on it. If it is a B34 that someone took the struts off of those sensors should be somewhere towards the back of the engine bay. Hope that helps.
B34:

B35:
Leave a comment:

Leave a comment: