Yet another M30 E30 amongst your ranks. WHATS THE DIFFERENCE BETWEEN A PORCUPINE AND

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • chadthestampede
    replied
    Just throw the url of the photo, say from photobucket, in between [img] [/img] tages

    so, with one of your previous images, http://img9.imageshack.us/i/img2155g.jpg/ click the image and use the url with JUST the image, in this case http://img9.imageshack.us/img9/8871/img2155g.jpg

    and put it between the img tags. I did it but it's huge so you may want to look into resizing them

    Leave a comment:


  • Adiabatic
    replied
    BIG updates with pictures as soon as I get a cable for my camera. Anyone know how to imbed photos instead of linking? What site is most compatible as well?

    Leave a comment:


  • Jean
    replied
    Raise the front of the car up, add more coolant/water.

    Leave a comment:


  • Adiabatic
    replied
    Heater core's hooked up, therein lies the problem currently I suppose. I'll have time to work on it this weekend, and I'll try to remember to snap some pics.

    Leave a comment:


  • chadthestampede
    replied
    picssssssssssssssssssssssss


    Did you try parking it on a hill and bleeding?

    It took a little bit to bleed mine and my whole cooling system was mickey moused together, but it worked great and I had heat. So I dunno. Might be best to hook up the heater core so you know it's all hooked up correctly.

    Leave a comment:


  • Adiabatic
    replied
    Sooo he's slowly overheating... when I opened up the thermostat bleeder (res cap still on however) and let him run, nothing came out, even when I took the screw all the way out. Being I've tested the (new) thermostat 3 times now, and he ran cool and fine both without the thermostat and with thermostat but heater core bypassed, I'm thinking either I suck at bleeding this thing or that stupid hot water valve by the heater core is mucking things up. Anyone ever had problems with it? I know it's default to open, so i'll probably unplug it then bleed the system again.

    On a lighter note, hes currently sitting on Firestone Winterforces (tucked in the front, not by choice, kind of hilarious looking actually) and drives fine with the new trailing arm :D When I finally get the cooling system awesome and some heat in the cabin, the Hella 4000s are going on.

    Leave a comment:


  • Adiabatic
    replied
    I am well protected, and very glad someone caught on :D

    EDIT for content: he's all fixed up, and I went on to getting that infamous leak at the heater core connection fixed with liberal amounts of JB weld and some specialty tools. Next up: Finding out why my blower motor decided to stop working. I suppose then I'll worry about such trivial things as working gauges and horns, then luxuries such as radio, as working heat has suddenly shot to the top of my priority list.

    Unfortunately, I'm back working in Northville and living in Jackson, MI, when the car is in Grand Rapids. Hopefully this weekend will be fruitful.
    Last edited by Adiabatic; 11-10-2009, 12:33 PM.

    Leave a comment:


  • Mr Two
    replied
    Adiabatic, do you have stairs in your house?

    Leave a comment:


  • Adiabatic
    replied
    I have some cell pics of Oliver getting on the flatbed, but nothing of the action. It was a TSD rally put on by the college's car club, but 75% of the participants just went balls out for fastest time instead of most accurate. I'll have some shots of the damage when I get back to where the car's sitting... it's pretty painful.

    Leave a comment:


  • Jean
    replied
    Got any pics of this rally event?

    Leave a comment:


  • Adiabatic
    replied
    I'm getting 7.75V off the signal wire at the diff, I had no idea about the 3 pin connector, however. Unfortunately the car is an hour and a half away, and LSPR is this weekend, so no real results till weekend after next I'm afraid. Thanks for the help :)

    Leave a comment:


  • Jean
    replied
    The tach is one black wire that you have to run from the m30 harness to the 3 pin connector above the glovebox area. The speedo should be your diff sensor, or it's wiring. Have you already checked all that?

    Leave a comment:


  • Adiabatic
    replied
    The two wires? I was still under the impression that I hadn't figured out the problem yet :P What two wires are you talking about? Also, it looks like once I get the speedo and tach fixed, I need to worry about the short to the instrument cluster thats taking out the fuel and temp gauges as well.

    Also, another amusing anecdote of the rally: The Cobalt SS went on to win it, but not before he blew a tire 5 miles from the finish, at 130mph on the highway. He drove it to victory, scraping rim and all.

    Leave a comment:


  • Jean
    replied
    Crazy!!! Run the two wires and fix the speedo and tach man :)

    Leave a comment:


  • Adiabatic
    replied
    Wow, so updates!

    I decided to take the car for a nice little 70 mile road rally a couple months ago, and at just over the halfway mark we were in first by 7 minutes! (I'll let you know how I knew that in a bit) The car does remarkably well drifting around corners on the dirt. Or at least it did for a while.

    My co-driver spitting out directions with gusto, we barreled around corner after corner, and soon enough started feeling a slight pulsation. Around an 80 degree sharp-ish right, we slid the back end around going something like 60 mph (just a guess, speedo still doesnt work :P ) and suddenly the car drops and I hear a horrible thudding noise.

    I said to myself: "Well, it's a rally! That's not going to stop me!" Unfortunately it did just that, as when I hit the accelerator out of the turn, we went nowhere. We coasted up a hill, shedding speed like mad as I kept trying for the accelerator. We eventually stopped, got out, and after seven minutes of fiddling around the second-place car (a 2009 Cobalt SS) flew by. We looked around, couldn't find anything wrong with the drivetrain, and it took us until about half the cars had flown past us to figure out the driver's rear wheel was currently sitting on the rotor.

    That's right... the FREAKING LUG STUDS SHEARED OFF. Apparently BMW's aren't supposed to drift or something.

    Anyways, we get it towed, turns out even an oxy-acetylene won't get the parts of lug stud out of the hub, and thus I go in search of a full trailing arm. Firestone wants 450 bucks for one, eBay wants 250, and some glorious man on this here site wanted all of 25 bucks for his old one. DEAL. So, as of last night, the BMW I have affectionately named Oliver is back on the road again.

    It's without a speedo, tach, or heat (right when I fix the heater core, the blower stops working, argh) but damnit it's on four wheels again :D

    Leave a comment:

Working...