Announcement

Collapse
No announcement yet.

So... who is making M30 mounts these days?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by lashtx View Post
    Good,
    How much are the B35 mounts?

    I am getting a whole E34 next week. Going to start collecting stuff!

    Thanks Kris
    They are $290 shipped. I have a set ready to go.
    Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
    ____________________________
    E-mail Panayiotisx2@gmail.com
    Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

    Comment


      #17
      Originally posted by Good & Tight View Post
      I only make the B35 mounts, did a swap for a friend and made the jig for them. So I do not make B34 mounts.

      The turbo car has the B34 but never made a jig for them, no one would use them anyway, the firewall and tunnel has to be smashed back and they bolt right to the cross member.
      oh ok got it that makes more sense, so you have no rubber mounts at all?

      Need Illustration or Design work? www.robbiebyerly.com

      Comment


        #18
        Originally posted by RickSloan View Post
        oh ok got it that makes more sense, so you have no rubber mounts at all?
        Nope, the engine bracket bolts right to the frame, the tranny is the same way. Really gives you that race car feel.
        Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
        ____________________________
        E-mail Panayiotisx2@gmail.com
        Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

        Comment


          #19
          Originally posted by Good & Tight View Post
          Nope, the engine bracket bolts right to the frame, the tranny is the same way. Really gives you that race car feel.
          so you have no metal fillings left in your teeth then?

          Need Illustration or Design work? www.robbiebyerly.com

          Comment


            #20
            Originally posted by RickSloan View Post
            so you have no metal fillings left in your teeth then?
            It's really not that bad.
            Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
            ____________________________
            E-mail Panayiotisx2@gmail.com
            Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

            Comment


              #21
              He's not kidding. On a related story.
              I had a f'ed up passenger side bracket, basically not doing a damn thing.
              So the oil pan was having sex with my steering rack. Didn't notice until it was
              bouncing around and making the front end hop at 80mph +.

              Fixed the problem and didn't really notice a difference on poly as far as vibration or
              noise. M30 smoothness. :)

              lol I'd imagine going deaf with solid tranny mounts though.

              Comment


                #22
                did you feel an improvement with the poly tho? cause im all about getting smoother

                Need Illustration or Design work? www.robbiebyerly.com

                Comment


                  #23
                  ^me?
                  compared to the engine laying on the steering rack, correcting the problem
                  did not change anything other then a bit more resistance turning the steering wheel
                  (center of gravity?)

                  and I can go 80mph+ without feeling like my front tires have bags of coke in them. :P

                  What you really feel/hear is the tranny mounts.
                  Put it this way, I bought some treehouse C.A.B. They are unbearably "full race" for me
                  so I sold them that same week.

                  Comment

                  Working...
                  X