Feeler: e34 m30 oil-pans

[LowR3V'in]

Will these fit on a m30b34 or are they just for a b35?
Thanks.

[Rennsport]

This thread is full of idoicy (same question asked and answered repeatedly)

this is the fucking pan you need to swap a m30 into a e30 to clear the subframe/steering rack.

This pan is already on your m30 if it is a m30b35.
This is a FS thread, if you have other questions read the multiple right-ups on the swap.

That said glws op, shouldn't be hard to unload these.

[marketing17]

I was under the impression this is the pan to use for a b35 into e30 swap.

[Aptyp]

no interest?

[xwill112x]

free bump for a great seller. :)

[Zacm829]

By also need the B35 oil pickup do you mean you will also need the oil pump? The pickup is part of the pump.

Yes

[Aptyp]

pics added and sale is on, I'll post this in the FS forum as well.

[eugeman]

Yes this is the pan you will need if you have any M30 beside the B35. In which case you would already have this pan. You will also need the B35 oil pickup.

By also need the B35 oil pickup do you mean you will also need the oil pump? The pickup is part of the pump.

[LowR3V'in]

What is the oil capacity for one vs the other?

[weaksauce]

well, looks like i have 2 B35 pans then. I thought the pan that was on it was original since it was in the same state of decomposition as the rest of the motor.....
learned something today!

[wildstoats]

maybe i am doing it wrong? I pulled the motor out a few weeks ago and it is sitting on the floor beside the car. anyone have a picture of a B34 pan versus a B35 pan to make sure I'm not crazy? The pan looks slightly different than the B35 pan, but not significantly different.

I've got ya, brosef:

[weaksauce]

maybe i am doing it wrong? I pulled the motor out a few weeks ago and it is sitting on the floor beside the car. anyone have a picture of a B34 pan versus a B35 pan to make sure I'm not crazy? The pan looks slightly different than the B35 pan, but not significantly different.

[Zacm829]

my b34 had the original pan on it out of a E28 and it fit just fine.

Are you running a stock steering rack? I don't see how this is possible.

[napabavarian]

What do you mean non b35 swapper? I was under the impression this is the pan to use for a b35 into e30 swap.


Art, I will buy one of those pans today if you pm me you paypal

I think he's trying to say that this is the b35 oil pan, e34 and e32.

[weaksauce]

my b34 had the original pan on it out of a E28 and it fit just fine.