Feeler: e34 m30 oil-pans

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • JoeMadoo
    replied
    They are saying that this is the pan that any m30 needs to go into an e30. So you shouldn't have trouble selling them.

    Leave a comment:


  • Jean
    replied
    Not quite. You will have the correct pan on your B35 if it's out of an e32 or e34, otherwise you'll need to swap it....

    Leave a comment:


  • Zacm829
    replied
    Yes this is the pan you will need if you have any M30 beside the B35. In which case you would already have this pan. You will also need the B35 oil pickup.

    Leave a comment:


  • bmw335isturbo
    replied
    Originally posted by BimmerScreamer
    What do you mean non b35 swapper? I was under the impression this is the pan to use for a b35 into e30 swap.


    Art, I will buy one of those pans today if you pm me you paypal
    b34's have diffrent pan.

    Leave a comment:


  • BimmerScreamer
    replied
    Originally posted by Zacm829
    Its the pan that non B35 swapper need to fit over the sub-frame. You should have no problem unloading them.
    What do you mean non b35 swapper? I was under the impression this is the pan to use for a b35 into e30 swap.


    Art, I will buy one of those pans today if you pm me you paypal

    Leave a comment:


  • Zacm829
    replied
    Its the pan that non B35 swapper need to fit over the sub-frame. You should have no problem unloading them.

    Leave a comment:


  • Aptyp
    replied
    I'll have to get on there.

    Leave a comment:


  • ZM Blue Devil
    replied
    Couple guys want them on mye28.com

    Leave a comment:


  • Aptyp
    started a topic Feeler: e34 m30 oil-pans

    Feeler: e34 m30 oil-pans

    I have 3 and maybe even 4 of them. I've never messed with an m30 swap, but was under impression that these were the pans necessary for swaps. Is that the case and does anyone need them?







    $120 each plus actual shipping or $300 for all 3 and shipping.
    Last edited by Aptyp; 03-02-2010, 12:37 PM.
Working...