e30 m30 swap radiator hoses??

[kylelauffer]

i am almost done with my swap. im using my stock e30 coolant overflow tank. it would be helpful if people could match these numbers up for me since you guys know it alot better than me. i need to buy some hoses real soon here. im trying to make this as simple as it can be. and i know there has to be a T made in one of the hoses am i right?







#9 is the top right radiator inlet and #10 is the bottom right one

[kylelauffer]

[kylelauffer]

[yert315]

are you planning to use the heater core?

[kylelauffer]

yes the stock e30 heater core

[RickSloan]

1 to 4
9 to 2
5 to 10

i believe 6 goes to the back of the head, and 7 goes to 3 with a tee in the middle for the over flow.

this is simple stuff your asking now...

[kylelauffer]

okay thank you rick. i just want to make sure. because i have read on a thread that its hard to use the e30 overflow tank. but most of you do. thanks guys i apritiate it

[yert315]

sorry, this has been bugging me. *Appreciate*

[Doughnut]

1 to 4
9 to 2
5 to 10

i believe 6 goes to the back of the head, and 7 goes to 3 with a tee in the middle for the over flow.

this is simple stuff your asking now...

Rick, this is good information! Very helpful post!

Just thought I'd say lol.

[RickSloan]

well thank you, ill double check on the fire wall ones tomorrow just to be sure