Diff Cover

[lashtx]

Anyone have a Diff cover to fit a E28 S3.46 Diff they are willing to part with?
I went to switch the covers on the Diffs in my M30 swap and the 4.10 diff that I took out of the 1991 318i is not the right cover, it is much smaller. So now I need a diff cover.

I need to check the output shafts to make sure they will work. I hope they do.

Thanks
Kris

[MR 325]

They won't work either. You need a diff cover and flanges from any 325e/i diff.

[lashtx]

Well that's just lovely!!! Thank you for the info. Do you know if the half shafts bolt up?

[dashboardmonkey]

half shafts on the e30 will not bolt up to e28 flanges.......i knew i shouldnt have thrown all those diff parts away

[lashtx]

Dashboard,

So the halfshafts from the 318is will bolt up to the 325e/I output shafts?

Thanks
Kris

[Doughnut]

They won't work either. You need a diff cover and flanges from any 325e/i diff.

+1!

So the halfshafts from the 318is will bolt up to the 325e/I output shafts?

Yes.

[lashtx]

Thanks for all the info guys! The hunt is on!

[lashtx]

Ok procured the necessary parts on e to the bay! On their way driving me nuts looking at all these parts. Want to drive the car!!!