flywheel question??

[kylelauffer]

i saw on one of good & tight thread that he used a m10 318i flywheel on a m30b34 engine and an upgraded clutch i believe. i have a m30b35 im sure the same thing but i want to confirm that the flywheel works with this engine??

thank you guys

[kylelauffer]

Anybody??

[Good & Tight]

It's a M10 flywheel machined for a Tilton twin disc.
What's your clutch setup now?

[kylelauffer]

I have stock clutch and flywheel. I was thinking about getting the stage two off turbo charge dynamics but it said I need a single mass flywheel so I was thinking the m10 flywheel or is the e28 535i flywheel single mass as well? What do you reccommend?
Thank you very much

[Good & Tight]

I have stock clutch and flywheel. I was thinking about getting the stage two off turbo charge dynamics but it said I need a single mass flywheel so I was thinking the m10 flywheel or is the e28 535i flywheel single mass as well? What do you reccommend?
Thank you very much

You would need the the E28 flywheel.

[LowR3V'in]

^What did you use exactly for the tilton?
Would you be able to use a 3 or 4 disc?

I'm looking at the tcd clutches but they're $600+ and holds 580tq

http://www.ebay.com/itm/TILTON-OT-II-TRIPLE-3-DISC-7-25-RACING-CLUTCH-29-SPLINE-NASCAR-ARCA-IMCA-ROD-?cmd=ViewItem&hash=item231490e478&item=150668895352&pt=Race_Car_Parts&vxp=mtr

Tilton is only $180?
and probably holds allot more.

[Good & Tight]

^What did you use exactly for the tilton?
Would you be able to use a 3 or 4 disc?

I'm looking at the tcd clutches but they're $600+ and holds 580tq

http://www.ebay.com/itm/TILTON-OT-II-TRIPLE-3-DISC-7-25-RACING-CLUTCH-29-SPLINE-NASCAR-ARCA-IMCA-ROD-?cmd=ViewItem&hash=item231490e478&item=150668895352&pt=Race_Car_Parts&vxp=mtr

Tilton is only $180?
and probably holds allot more.

I bought the whole setup as a package, it was actually a 3 disc that I converted to a twin.
It's holding close to 700ftlbs.

You would need to machine the flywheel down to accept the 7.25 set up. Well worth it if your making big TQ.

[South26]

The 533i 1983 has the lighter flywheel at 17lbs verses the 22lbs of the 535i. The 533 has the same one as the M5.


Andy

[LowR3V'in]

So basically you can use any 3/4 disc tilton and just have the flywheel machined
to bolt it on?

What did you do for the throw out setup?
Is drivability pretty much off/on?

[Lurker27]

I bought the whole setup as a package, it was actually a 3 disc that I converted to a twin.
It's holding close to 700ftlbs.

You would need to machine the flywheel down to accept the 7.25 set up. Well worth it if your making big TQ.

damn it, i should have done this

[Doughnut]

Is drivability pretty much off/on?

It would be like driving a fucking toggle switch.