E30 M30B35 M10 Tranny, Clutch problem!

[Carbon M3]

hey guys,

i'm building an type 1 e30 M3 DTM warsteiner rep.

1;1 replica with an M30 B35 engine..

bought the engine with M10 transmission for an former E30 swap..

but while fitting the clutch and pressureplate on the M30 i discovered a problem.. Wrong Pressureplate!

i' have a M10 260 getrag gearbox but my problem / question is :

What kind of Flywheel,clutch,pressureplate to mount in combination with the M10 gearbox.. ??

i hope somebody know an awnser to my problem.. :)

kind regards

[LJ851]

You need M10 parts.

The clutch will need to be stronger than stock to handle the M30 torque.

The M30 gearbox and is a much better long term solution if you can do it.

[rav320uk]

S14 M3 flywheel, M20 unsprung paddle clutch to go with the E30 M10 box

http://www.e30zone.net/modules.php?name=Forums&file=viewtopic&t=244886&highlight=m10+clutch

[Carbon M3]

thanks for the quik reply guys :)

does the M30 gearbox fit's without any problems in e30?

because the M10 is fitting perfect..

maybe an M10 performance upgraded clutch an option?

btw i have an E28 M5 flywheel on the m30.

[rav320uk]

M30 box fits fine on the M20 gearbox mounts.