I am having some issues with my M30 that I think might be related to oil pressure. I am going to install an oil pressure gauge and I was wondering what you guys recommend and where to put it. I will probabbly just run to autozone tomorrow and grabe a cheap oil pressure gauge/sender that I can put in the stock oil pressure sender. If someone has some good recommendations that would be great.
-
-
Let me be a little more specific. Anyone know of any specific gauges that have an adaptor that will fit in the 12x1.5 stock oil pressure sender? I hopefully want ot avoid tapping a bolt but most of the guages seem to be 1/4 or 1/8 pipe thread. -
Good news. I went to checker and I found an adapter that is a 12x1.5 that feeds out to a 1/4 NPT which is what all the oil gauges seem to need. So now I am set. I will throw the part number up tomorrow in case anyone is ever looking for one of these.Comment
-
any luck with part number..Comment
-
You can go to checker with part number 6848 or use this
This is for the set but if you can find them individually they are about $3. I got just one but I had to dig through the piles of brass fittings to find it. It would have been worth it to just order the set.Comment
-
thanks!Comment
Comment