Announcement

Collapse
No announcement yet.

Need help!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help!

    Okay, here's the lowdown. '89 735i M30B35 into an '84 318i. First bit of driving the car would run great for about 3-5 minutes, but after I would go full throttle once or twice (usually once) the car would start to jerk and jump like it wasn't getting enough fuel. Then one day the car was running awesome, and I accidentally hit the rev limiter(no tach). Every since then the car has been missing. It is now only running on 1 cylinder, sort of. I have replaced the following. cap, rotor, wires, plugs, crank sensor, timing chain was also replaced. Now the miss is not caused by anything mechanical I'm pretty sure. I don't hear any rattling as though something were loose or broken. It's just a plain miss, and the plugs aren't fouling out either which would mean that the injectors are more than likely not firing either. I do have a J. Conforti chip installed, and the engine hadn't been started for about a year meaning the computer wasn't reading anything for that year either. So, does anyone have any ideas cuz I'm all out of ideas.

    #2
    I have found out that even the spark coming from the coil is erratic. So, it has got to be some sort of sensor, or it's the ECU itself. Could it possibly be the pickup on the #6 wire even though these wires are new?

    Comment

    Working...
    X