Brake Booster for m30

[markpopaj]

Where is the vacuum nipple to connect the brake booster? My mechanic even can't find it. How did everybody run theirs?

[glnr13]

it's right below the bracket that holds the throttle cable for b35's.

you can see check valve in this photo: http://i469.photobucket.com/albums/r...l/DSCN1230.jpg

beat rubber hose connected to the nipple in this photo: http://e28-535i.com/upload/IMAG0956.jpg

after hunting online for a b32 or b34 it looks like those don't have one? this guy tapped his: http://e28-535i.com/upload/CIMG1631.JPG

some guys already have on in place? https://lh6.googleusercontent.com/-k...1/DSC_5165.jpg

[markpopaj]

it's right below the bracket that holds the throttle cable for b35's.

you can see check valve in this photo: http://i469.photobucket.com/albums/r...l/DSCN1230.jpg

beat rubber hose connected to the nipple in this photo: http://e28-535i.com/upload/IMAG0956.jpg

after hunting online for a b32 or b34 it looks like those don't have one? this guy tapped his: http://e28-535i.com/upload/CIMG1631.JPG

some guys already have on in place? https://lh6.googleusercontent.com/-k...1/DSC_5165.jpg

I'm looking at my engine and I don't have that. Mine was pulled from a 735i. Could this make any difference?

[glnr13]

weird, i just googled e32 735i motor and some have the nipple below the throttle cable and some have no visible nipple. i wish i had answer to help you.

[ThatOneEuroE30]

I ended up swapping on a b35 manifold.