Honda K24 swap interest?

[E30SPDFRK]

I'm in the parts collecting phase of this swap currently, hoping to work with Kmiata on the project!

[rover215]

Hey, KMiata- I noticed your new a/c kits for the Miatas. My e30 swap is going to take a while but I hope you'll consider a kit for the growing number of us Bim-heads :)
Might not take too much to adapt the Miata kit for the e30.

[itskingsteelo]

Hmmm in for this.
Saw the 2002 that CaTuned did and that little monster made some good power

[wworm]

I joined a handful of honda forums today...

[Chrisbike]

Looks like Garagistic has started to mock up a K engine in a e30.

[Sladek]

Looks like Garagistic has started to mock up a K engine in a e30.

awesome


Sent from my iPhone using Tapatalk

[E30SPDFRK]

Looks like Garagistic has started to mock up a K engine in a e30.

They'll somehow have it touching the radiator judging on how their other swap parts fit

[Wanganstyle]

They'll somehow have it touching the radiator judging on how their other swap parts fit

It’s hard to build race party when ya don’t race and don’t party (Mormons)

[KMiata]

Hey, KMiata- I noticed your new a/c kits for the Miatas. My e30 swap is going to take a while but I hope you'll consider a kit for the growing number of us Bim-heads :)
Might not take too much to adapt the Miata kit for the e30.

An E30 A/C kit should be a lot easier because the stock K compressor will probably fit. If not, then yes, the majority of our A/C kit would fit, you'd just need to modify the lines to your chassis. Any decent A/C shop can typically do that in a day.

[Sladek]

I'm so ready for parts to be available


Sent from my iPhone using Tapatalk

[Motheye99]

What is goona be the deal with wiring this up? I haven't really researched how your doing it on the Miata. And I too am so excited for this to come to life.

Sent from my SM-G950U using Tapatalk

[KMiata]

What is goona be the deal with wiring this up? I haven't really researched how your doing it on the Miata. And I too am so excited for this to come to life.

Sent from my SM-G950U using Tapatalk

Wiring on old cars is easy. We'll use a jumper harness and have to do a little splicing into the dash harness most likely. I'm not worried about it.

[LJ851]

They'll somehow have it touching the radiator judging on how their other swap parts fit

:rofl: :rofl:

[spec-al]

-100ish lbs off the front axle and no more broken M20 rocker arms? Highly interested in this for my race car (depending on final pricing for the swap bits I suppose).

[rover215]

A/C compressors shouldn't vary in price between the Accord (Element/CR-V, etc) and S2000, so I'll look into the mounting of the S2K compressor for fitment compatibility.

Now that I've got my engine and trans adapter, I'm feeling motivated .