Honda K24 swap interest?

[decay]

Was that a sniffer test on a dyno?

if you aren't in a rural area of california, it's very likely that your sniffer test happens on a dyno. every test i had done on my 3rd e30 was.

[The Dark Side of Will]

Then without reprogramming the automatic following a significant FD change, the engine will effectively be a gear lower on the dyno than it would have been stock. That'll hurt.

[Rev Run D]

Another vid from antipurist. https://www.youtube.com/watch?v=XpzR8drhkGQ

[Shangsta]

Another vid from antipurist. https://www.youtube.com/watch?v=XpzR8drhkGQ

This is awesome. I hit them up as they are in nc and I am planning to make a trip up there to look at both of the swaps(k and fc)

[Fucatypr]

Another vid from antipurist. https://www.youtube.com/watch?v=XpzR8drhkGQ

Thanks for posting this video! We built the k swapped e30 because we wanted to test it. The trans mounts/brackets are the same as our f20c kit and our jumper harness will for the e30/kswap will go into production after the e30/f20 jumpers, that are currently in production, are done. After the problems we had with the builder of the first harness, we are having these built by Rywire.

[Motheye99]

Thanks for posting this video! We built the k swapped e30 because we wanted to test it. The trans mounts/brackets are the same as our f20c kit and our jumper harness will for the e30/kswap will go into production after the e30/f20 jumpers, that are currently in production, are done. After the problems we had with the builder of the first harness, we are having these built by Rywire.

any pricing estimates, what transmission is the K swap running? Looks like 3 players in the Honda swap game. Sounds like there going to hit market at the same time.

[Rev Run D]

from: https://www.reddit.com/r/E30/comment...k24a2/exly2hs/

The guys at anti-purist Fucatypr said:

The f20c can run on the stock s2000 ecu but you have to remove the immobilizer and that leaves you with a CEL. I drove the car like that for 2 months for testing, it ran great. Haven't tried it yet with a JDM ecu. we would suggest an aftermarket ecu. As far as an eta, for the f20c kits we are waiting on the oil pans. The harness are in production at Rywire and everything else is done. Because of the nature of the k serie swap, we may offer a partial kit and a list of parts from other manufacturers of what you'll beed.

[rover215]

Both your comments are regarding the f20C- any info on the K24 swap? I have most of the parts except the engine mounts/adapters, the oil pan, and wiring/management system. I'll be keeping the stock G260 5 speed trans.

[Wanganstyle]

any pricing estimates, what transmission is the K swap running? Looks like 3 players in the Honda swap game. Sounds like there going to hit market at the same time.

K swap is best with the s2000 transmission It matches the engine the best also. Honda power to Honda powertrain Engine to trans Adapter kit is already sold by a few companies and inexpensive / proven easy A custom flywheel is made by at least one aftermarket clutch company and the s2000 clutch just pops in. S2000 gearbox = the feeling that all of these fancy ass$$$$ shifters for bmw are trying to replicate to but never get to.

[rover215]

Hey fucatypr- what about the K24 options? Many potential customers (like myself) want or already have them. I know your business partner has one in his 318is, but no mention yet here as to those parts or kit.
You guys, KMiata, and Garagistic are all on board with the K-series. That's great news for us all.

[Wanganstyle]

Hey fucatypr- what about the K24 options? Many potential customers (like myself) want or already have them. I know your business partner has one in his 318is, but no mention yet here as to those parts or kit. You guys, KMiata, and Garagistic are all on board with the K-series. That's great news for us all.

K to s2k trans adapters are made by ballade sports, 2ners and others. Clutchmasters and others make the flywheel The e30 specific items will just be the engine mounts, oil pan, trans mount, driveshaft and wiring harness. You can call up rywire for any custom engine harness for any car I’ve got a k engine also and am waiting to see who offers an actual useful oil pan (that doesn’t cost more than my k24a2) The k24 locally seems to have oil supply issues here (on the race track) in both fwd and rwd applications; at minimal the original capacity of oil must be retained and honestly overfilling wouldn’t be a bad idea- it’s suggest by hasport who blew a lot off motors before overfilling.

[Fucatypr]

Hey fucatypr- what about the K24 options? Many potential customers (like myself) want or already have them. I know your business partner has one in his 318is, but no mention yet here as to those parts or kit.
You guys, KMiata, and Garagistic are all on board with the K-series. That's great news for us all.

We used a JSP adapter for the transmission and intake manifold. For the K swap we will offer mount brackets (you will need 2 sets of aftermarket m20 mounts), the jumper harness (you will also need an engine harness), instructions, and maybe an oil pan, everything else is already available.

[rover215]

Wanganstyle and @Fucatypr: I know you guys aren't big fan of the stock Getrag 260, but I'm sticking with mine and already have the KMiata adapter and flywheel. I'll source a 2002-2004 Acura RSX manual engine harness or 2003-2006 Honda Element manual engine harness, depending on which management system I go with. I also have the KMiata Type S oil pump and windage tray (will be looking into other baffling). Can I just reuse my stock M20 engine mounts? Just waiting on an oil pan that'll work, but pretty sure KMiata is almost done with that as well.
I love that the two of you figured it out and are basically the first to have two stree-going, driveable, legal K-swapped e30s (I could be wrong).

[Motheye99]

IT should be possible to make a F20c CARB legal. K series no. I'm starting to like the F20c more even if its more expensive. 5500 motor and trans is the ebay price.

[The Dark Side of Will]

Why not the K-series? No properly configured catalyst because it's FWD only?

[Shangsta]

We used a JSP adapter for the transmission and intake manifold. For the K swap we will offer mount brackets (you will need 2 sets of aftermarket m20 mounts), the jumper harness (you will also need an engine harness), instructions, and maybe an oil pan, everything else is already available.

Any chance you will be bringing either of the cars to e30 Octoberfest?