335ist writeup.

[bmw335isturbo]

this is were my project begins.


1986 BMW 325 2 DOOR (M30 SWAP)

1991 535i M30 Engine (3.5l inline 6)

• Turner Motorsport Jim Conforti Performance Engine Chip ~235hp at the crank

• Bosch Design II (4 nozzle) 19lb/hr Injectors

• New Water pump, Thermostat, Spark Plugs

• Ireland Engineering Urethane Race Motor Mounts

• e30.de M30 -> E30 Motor Mount Brackets Engine Position III

• Fully Custom Dual 2.25” Exhaust with High Flow Magnaflow Catalytic Converter and Stromung e30 M3 Rear Muffler Section (Very European Sound!!)

• Brand New E28 535i Radiator

• Zirgo 16” 3600cfm Electric Fan

Drivetrain

1991 535i Getrag 260/5 transmission (5 speed) 190k mi

• JBRacing Lightweight Flywheel

• SPEC Stage 3 Clutch Kit

• UUC Urethane Racing Transmission Mounts

• New Driveshaft from Driveline Services of Portland

• Understeer.com Short Shift Kit

Suspension

• Ground Control Coilovers

o Spring Rates: 425F/450R

• Koni Sport Adjustable Shocks

• Ireland Engineering Race Fully Adjustable Front Camber Plates

• Ireland Engineering 25mm Front Sway Bar and Mounts link links bushings

• Ireland Engineering 22mm Rear Sway Bar and Mounts link mounts bushings

• Ireland Engineering Urethane Race Rear Subframe Mounts

• Ground Control Rear Shock Mount Reinforcement

• Urethane Rear Trailing Arm Bushings

• E30 M3 Offset Front Control Arm Bushings

• New Control arms and Tie Rods

• H&R Hubcentric 4x100 15mm Spacers

• Genuine SSR GT1 17x7” Wheels (4x100) 17lbs each Lightweight Race Wheels

• Tires are Bravus Bavarium in the rear and Bridgestone RE750 Fronts (215/40/17)

Brakes

• Brembo Rotors Front Rear

• Stainless Steel Braided Brake Lines

• ATE Racing Super Blue Brake Fluid

• Pagid Front and Rear Performance Brake Pads

Misc

• Prolumen HID Kit 6000k H1 Bulb

• European Ellipsoid “Smiley” Projector Headlights

• Viper Alarm

• Kenwood 9102 Amp (1700 Watt)

• Sony 1502 Amp (760 Watt)

• 1991 535i Stock Speakers

• Sony CD Deck

• Alpine Type R 10” Sub in Custom Ski Pass Enclosure

• Schucks Auto Supply Leatherette Racing Seat in Driver’s Side

• Tucked Front and Rear Bumpers (Front is Color Matched to Body

[ddongbap]

Thats hott.

Or as they say on honda-tech fourms;

*THUMBS UP*

+1

or +111111111

[Mot]

are you Local to portland? this sounds exactly like this guy Jason's project here in town.....

[bmw335isturbo]

are you Local to portland? this sounds exactly like this guy Jason's project here in town.....

Yes that is me Their are two self built 335is'es here in town both are e34 335i's one is an 87 325is and the other is 1986 325e in short
lovenbmws he is one then Me Bmw335isturbo

[bmw335ist]

All right I picked up my new 335is come to find out the frount camber ajustment's were installed 180 degrees off long story short they adjusted the hole car, So when I decide what I want to do track,drag or just drive the car they will make sure that the car will drive just fine.